• Outdoor signage for corporate identity applications and retail shops, including canopies, fascia signs, columns and accents.
Note: Custom colors are also available upon request.
Please check with customer service for availability.
Colors might change without notice depending on program.
B E N E F I T S
• High performance polyester coating: GRAPHIC-AL™ HP has a consistent paint finish of high performance polyester coating with a special 10-year coating warranty.
• Excellent flatness: Because of its continuous laminating process, GRAPHIC-AL™ HP is a flat panel without buckles, edge waves and overall warping.
• High rigidity and Lightweight: GRAPHIC-AL™ HP offers high rigidity able to withstand outdoor wind load conditions in a lightweight material. It is equivalent to 2.2mm thick aluminum and only weighs 0.76psf.
• Workability: GRAPHIC-AL™ HP is easy to cut, groove, bend and assemble with regular machines and tools widely used in the sign industry.
M A T E R I A L C O M P O S I T I O N
GRAPHIC-AL™ HP is composed of two skins of 0.01” thick aluminum and a polyethylene core. The topside is a high performance polyester coating produced in a coil coating line and is covered with a transparent protective film.
P A N E L D I M E N S I O N
Thickness: 3mm
Size: 51”x122”
Note: Custom sizes are available upon request.
P R O D U C T T O L E R A N C E
Width: ± 0.08” (2mm)
Length: ± 0.16” (4mm)
Thickness: ± 0.008” (0.2mm)
Bow: maximum 0.5% of length and/or width
Squareness: maximum 0.2” (5mm)
C H A R A C T E R I S T I C S
PROPERTIES
The panel weight is almost equivalent to 1.4mm thick aluminum sheet. The thermal expansion is almost equivalent to an aluminum sheet.
RIGIDITY (BENDING STRENGTH)
GRAPHIC-AL™ HP 3mm is equivalent to 2.2mm thick aluminum in rigidity.
FLAMMABILITY CHARACTERISTICS
GRAPHIC-AL™ HP meets the following standards.
UL 94 V-0 and UL 879 approved, as an electric sign component Class 1 or Class A fire rated, as a building material.
Note: Thermal expansion rate 13×10-6in/in/°F means that the elongation/contraction is 0.06” per 48” per 100°F.
GRAPHIC-AL™ HP 3mm is equivalent to 2.2mm thick aluminum sheet in rigidity. This aluminum sheet weighs 1.6 times GRAPHIC-AL™ HP.
